The California Look, Classic Volkswagen Beetle, Bus, Ghia, Street and Racing

Navigation
News

May 26, 2012, 03:49:56 am
Pages: [1]   Go Down
Print
Author Topic: Steve Timms Signature heads.  (Read 1390 times)
Darren DVKK- K-Roc
Post-aholic
****
Offline Offline

Posts: 708



WWW
« on: January 11, 2007, 02:45:50 pm »

I have a pair of Steve's Signature Series heads with Manley 42 X 37.5 Valves, Erco Triples, Ti- Retainer etc..
94 Bore, The Chambers are 45 cc's, and they flow about 210 CFM at .600" on my bench. all work is original as done by Steve.

Heads have less than 1000 miles on them, almost all street miles ( we switched to a pair of my ported Comp Eliminators) I have disassembled ,cleaned checked everything measured springs etc.. and re assembled. ready to install and run. There are 2 sets of port matched manifolds included,  one set of IDF, and one set of IDA.

on the Samba these go for $1600.00  ( see ad )

http://www.thesamba.com/vw/classifieds/detail.php?id=185137

I will sell these for $1150.00 Shipped. ( in North America )

I can Email more pic's if needed.

Thanks.

« Last Edit: January 11, 2007, 08:27:51 pm by Darren DVKK- K-Roc » Logged

Your valves are floating.. you just don't know it.
Gas Cap
Part of the woodwork
*****
Offline Offline

Posts: 1408



« Reply #1 on: January 11, 2007, 08:18:55 pm »

What bore? I thought I would point that out. -Jacob- Cool
Logged

East Coast Burnout King
98'GTI VR6
91'JettaGLI
Darren DVKK- K-Roc
Post-aholic
****
Offline Offline

Posts: 708



WWW
« Reply #2 on: January 11, 2007, 08:28:59 pm »

What bore? I thought I would point that out. -Jacob- Cool

Fixed,  Thank you for pointing that out.

K-Roc,
Logged

Your valves are floating.. you just don't know it.
Pages: [1]   Go Up
Print
 
Jump to: