Lasercut parts: transmount, triggerwheels etc. custom parts also available. PICS

[-Alex-]

At the beginning of the september i am going to order some lasercut parts, custom parts also available. Feel free to ask.  All  parts are S355 steel, which is about 30% stronger than normal  "plain carbon steel" or "mild steel". Very goog to weld.


At the moment, these are on the order list: Weber IDA flanges, Wheel adapters, Transmount kit, Triggerwheels, Flywheel pullers etc.





At the moment i have these parts ready to go:


1 x set of -67 bus axle ends +3 degree caster  60€


Send me e-mail or PM, if you are interested

Custom parts also available, and i can do reasonable cheap cad drawings.

alexstorskrubb@jippii.fi


I have ready drawings about these parts, various thicknesses available, up to 15mm:


- Custom wheel adapters 5x205 -> 4x108 etc 100-150€ / set

- Axle ends T1 -65 and T2 -67  50-75€ / pair

- Transmount kit T1 with brackets 45€

- Full transmount kit T1 with 50x30 bar and rubbers 100€
  
- Transmount flange for T2 30€

- Flywheel  puller plate for 200mm FW 25€

- Flywheel  puller plate Multi T1-T4-WBX  40€

- Triggerwheels 134x6 basic style 20€

- Triggerwheel custom 25-30€

- T3 pancake engine large 36-1 230x6 triggerwheel 35€

- Sensormount 10€

- Sensormount with basic style triggerwheel 25€/kit

- Intake flanges IDF/IDA/DCOE etc  12,5-18€ / pcs

- Manifold flanges T1-T4 20-35€ / pair

- Dual carb linkage bases, IDF/IDA etc, 35-45€ / pair

- Rack and pinion bracket kit for BJ beetle 80€


Shipping varies from Finland to USA at 1-10kg amount of parts between 15-56 euros, flat parts less than 2kg can be shipped at cost of 15 euros. Dollar to Euro exchange rate is now about $0,7 = 1 Euro.


Need to pay before ordering. paypal (add 4%) and moneytransfer accepted.

[sideshow]

I would like to do this to K&L ghia, what is involved? Is the required rack even available in the US?

[KAFUR1]

you need to pm him or e mail!

[sideshow]

Actually he was a wealth of information, paraphrasing;
The rack is sourced from used Polo's model is 86 or 86C 1981-1994 (http://en.wikipedia.org/wiki/Volkswagen_Polo_Mk2)
And an example of one stateside http://en.wikipedia.org/wiki/Volkswagen_Polo_Mk2

[-Alex-]

Order is on the way    Most are custom parts etc. few extras i did order, like  3 x transmount parts, 3 x 12-1 134x6mm triggerwheels with brackets and flywheel puller for 200mm FW and T1-T4-WBX multiversion.