The California Look, Classic Volkswagen Beetle, Bus, Ghia, Street and Racing
On Cal-Look.com Cal-Look News Press Releases About Cal-Look.com Twitter Contact Us
The Community Contributors How To Contribute eBay Classifieds Online Swap Meet Top 10 / 20 Video
Welcome, Guest. Please login or register.

Register
Login
Navigation
Home
Help
Search
News

May 22, 2012, 04:38:27 pm
Pages: [1]   Go Down
« previous next »
Print
Author Topic: Help please Norris 407s cam Question..  (Read 677 times)
stooby
Newbie
*
Offline Offline

Posts: 2
« on: October 16, 2010, 02:19:22 pm »
According to this you have to run 1.1:1 rockers only with the 407s . My question is what would be the advantage or disadvantage with running Ratio rockers ?
Logged
maui
Post-aholic
****
Offline Offline

Posts: 950
« Reply #1 on: October 16, 2010, 02:41:57 pm »
My friend ran a 407x1.1 on his 69x88 with F/F heads and 48s and gearing with good results [12.90+13.00] in his street 56 bug back in the early 70s and den I ran that cam for a few years with 1.25s with no problems so I can say that with 1.25s is no problem if the heads can handle the extra flow or else it"s a waist.
Logged
Kehau
stooby
Newbie
*
Offline Offline

Posts: 2
« Reply #2 on: October 16, 2010, 03:37:32 pm »
What  is your opinion of this cam in a 2276 94x82 --  40x35.5 ported heads 40 IDF carbs auto-craft 1.25 rockers. Is the cam to small ??
Logged
Pages: [1]   Go Up
Print
Cal-Look.com Forum > Keith Seume's / Cal-Look.com's World Famous Cal-Look Forum > Cal-Look / High Performance (Moderators: Michael, John P, Eric Ellis (57HotrodVW)) > Topic: Help please Norris 407s cam Question..
 « previous next »
 
Jump to: